The Vortex Pro Torque Wrench (PR-TW) sets scope ring and action screws to the correct 10-90 in-lb torque so you never crush a tube or strip a base. Supplied as a full kit with hex, Torx and screwdriver bits in a hard case, backed by the Vortex VIP warranty.
$299.00
1 in stock (can be backordered)
The Vortex Pro Torque Wrench (Vortex part PR-TW, Extravision code VOPRTW) is an adjustable click-type torque driver with a 10 to 90 in-lb range for mounting riflescopes, red dots, bases and rifle action screws. Over-tightening dents scope tubes and strips threads; under-tightening lets mounts shift under recoil. Setting the published torque value on the wrench removes the guesswork. The locking 1/4″ bit holder accepts any standard 1/4″ bit, and the kit ships with the bits used on almost every ring, base and chassis sold in Australia. Backed by the Vortex VIP unlimited lifetime warranty through the Australian distributor, Extravision.
What torque should I use on scope rings?
Follow the ring maker’s published figure. As a guide, Vortex specifies 18 in-lb on Pro Series ring screws and 30 in-lb on base clamp screws; set that value on the dial and stop at the click.
Is this the Pro model or the original Vortex torque wrench?
This is the Pro Torque Wrench (PR-TW) with the 10-90 in-lb range and the expanded bit set, not the original fixed-range wrench.
Does it come with bits?
Yes: eight hex bits, three Torx bits, a 10 mm screwdriver bit, a 1/2″ socket and a 1/4″ square-drive adaptor, all in the kit case.
Optics and mounting accessories are not firearms and ship Australia-wide without a licence. Specifications from Vortex Optics (vortexoptics.com); Australian distributor Extravision (extravision.com.au), whose VIP unlimited lifetime warranty applies to genuine Australian-supplied Vortex product. 3 Gun Tactical, Licensed Firearms Dealer 50001578, Tingalpa QLD.
The Vortex Pro Torque Wrench (Vortex part PR-TW, Extravision code VOPRTW) is an adjustable click-type torque driver with a 10 to 90 in-lb range for mounting riflescopes, red dots, bases and rifle action screws. Over-tightening dents scope tubes and strips threads; under-tightening lets mounts shift under recoil. Setting the published torque value on the wrench removes the guesswork. The locking 1/4″ bit holder accepts any standard 1/4″ bit, and the kit ships with the bits used on almost every ring, base and chassis sold in Australia. Backed by the Vortex VIP unlimited lifetime warranty through the Australian distributor, Extravision.
What torque should I use on scope rings?
Follow the ring maker’s published figure. As a guide, Vortex specifies 18 in-lb on Pro Series ring screws and 30 in-lb on base clamp screws; set that value on the dial and stop at the click.
Is this the Pro model or the original Vortex torque wrench?
This is the Pro Torque Wrench (PR-TW) with the 10-90 in-lb range and the expanded bit set, not the original fixed-range wrench.
Does it come with bits?
Yes: eight hex bits, three Torx bits, a 10 mm screwdriver bit, a 1/2″ socket and a 1/4″ square-drive adaptor, all in the kit case.
Optics and mounting accessories are not firearms and ship Australia-wide without a licence. Specifications from Vortex Optics (vortexoptics.com); Australian distributor Extravision (extravision.com.au), whose VIP unlimited lifetime warranty applies to genuine Australian-supplied Vortex product. 3 Gun Tactical, Licensed Firearms Dealer 50001578, Tingalpa QLD.
| Brand | Vortex Optics |
|---|---|
| Model | Pro Torque Wrench |
| Part number | PR-TW (VOPRTW) |
| Torque range | 10-90 in-lb |
| Bit holder | Locking, 1/4" bits |
| Hex bits | 3/16", 5/32", 9/64", 5 mm, 4 mm, 3 mm, 2.5 mm, 2 mm |
| Torx bits | T-10 (extended), T-15, T-25 |
| Other bits | 10 mm wide screwdriver, 1/2" socket, 1/4" hex to 1/4" square adaptor |
| Warranty | Vortex VIP unlimited lifetime |
| Availability | In stock at 3GT |
Reviews
There are no reviews yet.