TriggerTech’s ambidextrous AR safety selector in stainless: set it up for a 45° short throw or standard 90°, with a DLC-coated 440C tumbler and a silicon nitride ball-tipped detent for an ultra-smooth safe-to-fire. Installs and removes without pulling the pistol grip after the first fit.
$199.95
4 in stock (can be backordered)
The TriggerTech AR Safety (part ARS-SNS-49, stainless) is an ambidextrous safety selector for AR-15 pattern rifles, designed by TriggerTech to match the performance of its AR triggers. It can be configured at installation for a 45° short throw or a conventional 90° throw, and comes with interchangeable short and long levers plus a cap so you can run a single-sided lever if you prefer. The tumbler is 440C stainless steel with a DLC coating, the levers are 17-4 stainless, and the detent is 440C with a silicon nitride ball tip for a low-friction, consistent feel. TriggerTech’s patented design lets the safety be removed and refitted without removing the pistol grip after the initial install — handy for trigger changes and cleaning. For Australian Category D licence holders and competition shooters running optics-ready AR platforms, it is a direct upgrade to the mil-spec selector.
Does the TriggerTech AR Safety fit an AR-10 / large-frame AR? TriggerTech’s product page lists it as an AR safety without naming platforms; retailers list it for the AR-15. Check your lower’s selector bore before ordering for a large-frame rifle.
Is it 45° or 90°? Both — you choose the tumbler orientation when you install it. “Short throw” refers to the 45° setting.
Do I need a licence to buy it? It is a firearm part. 3 Gun Tactical supplies firearm parts in line with Queensland requirements; contact us with your licence details if unsure.
3 Gun Tactical, Licensed Firearms Dealer 50001578, Tingalpa QLD.
The TriggerTech AR Safety (part ARS-SNS-49, stainless) is an ambidextrous safety selector for AR-15 pattern rifles, designed by TriggerTech to match the performance of its AR triggers. It can be configured at installation for a 45° short throw or a conventional 90° throw, and comes with interchangeable short and long levers plus a cap so you can run a single-sided lever if you prefer. The tumbler is 440C stainless steel with a DLC coating, the levers are 17-4 stainless, and the detent is 440C with a silicon nitride ball tip for a low-friction, consistent feel. TriggerTech’s patented design lets the safety be removed and refitted without removing the pistol grip after the initial install — handy for trigger changes and cleaning. For Australian Category D licence holders and competition shooters running optics-ready AR platforms, it is a direct upgrade to the mil-spec selector.
Does the TriggerTech AR Safety fit an AR-10 / large-frame AR? TriggerTech’s product page lists it as an AR safety without naming platforms; retailers list it for the AR-15. Check your lower’s selector bore before ordering for a large-frame rifle.
Is it 45° or 90°? Both — you choose the tumbler orientation when you install it. “Short throw” refers to the 45° setting.
Do I need a licence to buy it? It is a firearm part. 3 Gun Tactical supplies firearm parts in line with Queensland requirements; contact us with your licence details if unsure.
3 Gun Tactical, Licensed Firearms Dealer 50001578, Tingalpa QLD.
| Brand | TriggerTech |
|---|---|
| Model | AR Safety |
| Part number | ARS-SNS-49-YCM |
| Finish | Stainless |
| Throw | Selectable 45° or 90° |
| Ambidextrous | Yes (short and long levers, single-side cap included) |
| Tumbler | 440C stainless steel, DLC coated |
| Levers | 17-4 stainless steel |
| Detent | 440C stainless, silicon nitride ball tip |
| Platform | AR-15 pattern |
| Country of origin | Canada (TriggerTech) |
| Availability | In stock at 3GT |
Reviews
There are no reviews yet.